End Yokes
Filters: BRAND = Neapco, | PART NUMBER | SERIES | SPLINE COUNT | SPLINE DIA. | HUB DIA. | THRU HOLE | C/L TO END | STYLE | DIFF MODEL | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|
N2-4-4061X |
1310 | 10 | 1.125 | 1.552 | 1.500 | 3.000 | CV | Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699 | LD | Neapco | |
| N2-4-2791 |
1310 | 10 | 1.125 | 1.552 | 1.500 | 3.000 | UB | LD | Neapco | ||
| N2-4-2671 |
1310 | 10 | 1.375 | 1.750 | 1.750 | 3.220 | UB | 20 DEGREES JOINT ANGLE | LD | Neapco | |
| N3-4-2171-1 |
1350 | 10 | 1.375 | 1.720 | 1.780 | 3.280 | BS | LD | Neapco | ||
| N3-4-6561-1 |
1410 | 10 | 1.500 | 1.812 | 2.000 | 3.719 | BS | COUPLING SHAFT STYLE | LD | Neapco | |
| NOE-04-5695-A |
1000 | 15 | 1.026 | 1.630 | 0.000 | 2.500 | ISR | LD | Neapco | ||
| NOE-04-2181-A |
1000 | 21/22 | 0.984 | 1.430 | 1.570 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2135-A |
1000 | 22 | 0.984 | 1.500 | 0.380 | 2.105 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): .380-.400 PIN HOLE SIZE (in): .312-.318 Thru |
LD | Neapco | |
| NOE-04-2179-A |
1000 | 22 | 0.984 | 1.430 | 1.570 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2141-A |
1000 | 22 | 0.984 | 1.430 | 0.500 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2183-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.440 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2192-A |
1000 | 22 | 0.984 | 1.430 | 0.500 | 3.300 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2190-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.220 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2185-A |
1000 | 22 | 0.984 | 1.430 | 0.690 | 3.650 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.69 PIN HOLE SIZE (in): .232-.238 One side only |
LD | Neapco | |
| NOE-04-2144-A |
1000 | 22 | 0.984 | 1.630 | 0.050 | 2.500 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .312-.318 Thru |
LD | Neapco | |
| NOE-04-2654-A |
1000 | 22 | 0.984 | 1.500 | 0.000 | 1.940 | ISR | LD | Neapco | ||
| NOE-04-3871-A |
1000 | 22 | 0.984 | 1.380 | 2.110 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): .38-.40 PIN HOLE SIZE (in): .314-.318 Thru |
LD | Neapco | ||
| NOE-04-3872-A |
1000 | 22 | 0.984 | 1.380 | 0.500 | 3.300 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 0.5 PIN HOLE SIZE (in): .232-.238 |
LD | Neapco | |
| NOE-04-6032-A |
1000 | 22 | 0.984 | 1.500 | 1.500 | 4.000 | ISR | PIN HOLE DISTANCE TO END OF HUB (in): 1.57 PIN HOLE SIZE (in): .232-.238 |
LD | Neapco | |
| NOE-02-2125-A |
1000 | 22 | 0.984 | 1.300 | 3.000 | ISR | SPLINE YOKE W/FLANGE PILOT N/A BOLT CIRCLE 2.500 M8 x 1.25 THRU F-CL 2.400 |
LD | Neapco | ||
| NOE-02-2171-A |
1000 | 22 | 0.984 | 1.600 | 2.500 | ISR | SPLINE YOKE W/FLANGE PILOT 3.000 BOLT CIRCLE 3.375 5/16-18 F-CL 1.000 |
LD | Neapco | ||
| N2-4-JK02 |
1310 | 24 | 1.250 | 1.876 | 1.500 | 3.000 | UB | Used at differential end on 07+ Jeep JK. | LD | Neapco | |
| N3-4-JK04 |
1350 | 24 | 1.250 | 1.876 | 1.500 | 3.000 | UB | Used at differential end on 07+ Jeep JK. | LD | Neapco | |
| N2-4-JK06 |
1310 | 24 | 1.250 | 1.850 | 1.500 | 3.000 | UB | Jeep JK Conversion - Pinion Front | LD | Neapco | |
| N3-4-JK08 |
1350 | 24 | 1.250 | 1.850 | 1.500 | 3.100 | UB | Dana 30 | Front has 1.850 seal surface | LD | Neapco |
| N2-4-FD02X |
1330F | 28 | 1.235 | 1.810 | 2.420 | 4.030 | UB | Joint Angle 25 degrees | LD | Neapco | |
| N2-4-FD01X |
1310 | 28 | 1.235 | 1.810 | 2.420 | 4.030 | UB | Joint Angle 25 degrees | LD | Neapco | |
| N2-4-GM01X |
1310 | 30 | 1.328 | 1.740 | 1.190 | 2.590 | UB | LD | Neapco | ||
| N2-4-GM02X |
1330 | 30 | 1.328 | 1.740 | 1.190 | 2.700 | UB | LD | Neapco | ||
| N2-4-GM03X |
1310 | 30 | 1.312 | 1.940 | 1.150 | 3.160 | UB | LD | Neapco | ||
| N3-4-0880-1X |
1350 | 30 | 1.312 | 1.940 | 1.150 | 3.190 | BS | LD | Neapco | ||
| N2-4-JK01 |
1310 | 32 | 1.401 | 1.943 | 2.000 | 3.443 | UB | Used at transfer case on 07+ Jeep JK. Front and rear non-CV 1310 yoke. |
LD | Neapco | |
| N2-4-5341 |
1310 | 32 | 1.401 | 1.880 | 2.000 | 3.880 | CV | Joint Angle 13 degrees | LD | Neapco | |
| N6.5-4-3281-1X |
1810 | 44 | 2.274 | 2.938 | 2.500 | 5.250 | HR | JOINT ANGLE :30 DEGREES | HD | Neapco | |
| N6.5-4-3721-1 |
1810 | 46 | 2.380 | 3.250 | 2.320 | 5.160 | HR | HD | Neapco |
